I sent you an email to the other address and haven't heard anything.
What do you have brand new still in the box and what are you asking for it?
What HF and 2 meter radios do you have?
73, Gary, N5GD
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Carjohns27
Sent: Friday, December 19, 2014 5:15 PM
To: [log in to unmask]
Subject: Re: G5RV Vs. Alpha-Delta Antenna
Hi, I have a brand new one for sale. Still in it's box. I'll never use it. I
also want to sell all my ham equipment as soon as possible. Things are
changing for me, and it's just setting around here and not being used
anymore. Won't be used where I'm going either. I don't have the info for the
ham list, it got delletted, and all the messages are coming into my inbox.
I also have another email address that I'd prefur to be contacted at. We can
talk about prices when you write.
I have an hf rig with power supply, mc60 mike, and keyer I'd like to keep
together.
I have two two meeter radios, one doesn't have a mike, an all mode Kam
packet unit, and a jay pole. Would like to keep this all together.
Please write to
[log in to unmask] and we can discuss any prices.
Carolyn Kj4vt
--------------------------------------------------
From: "Steve" <[log in to unmask]>
Sent: Thursday, December 18, 2014 2:31 PM
To: <[log in to unmask]>
Subject: G5RV Vs. Alpha-Delta Antenna
> BlankThey're all listed on their site, but I think you might buy them from
> a
> dealer.
>
> http://www.alphadeltacom.com/pg1.html
>
>
> The DXcc is 82-feet long, they also have slopers, like the DXA and DXB
> which
> is a one-legged version of the A but they generally needed to be mounted
> on
> a tower with a good ground and a beam for a capacitive hat. You can mount
> those slopers on non-metalic structures and in trees by running a wire
> from
> the mounting bracket to ground.
>
> The slopers don't use ladder-line or twin-lead. You can feed them with
> RG8
> or RG58 as you like.
>
> Steve, K8SP
>
> ----- Original Message -----
> From: Don Breda
> To: [log in to unmask]
> Sent: Thursday, December 18, 2014 12:19 PM
> Subject: Re: G5rv versas alpha delta etc.
>
>
> Thanks for the info.
>
> I just looked on their website however and I see the dx-dd and dx-lv+ or
> something like that but not the dx-cc.
>
> Has it been superseded by the dx-dd?
>
> The dx-dd seems to be about 82 feet long and has one or more coils
> attached to the wires.
>
> A little more enlightenment please.
>
>
> Thanks.
>
> Don
>
>
> On 12/18/2014 11:48 AM, Bob Ray wrote:
>> The DXCC you feed with straight 50 ohm coax. The G5rv has a length of
>> latterline and a balan to match to 50 ohm.
>>
>> Bob kd0br
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> On Behalf Of Don Breda
>> Sent: Thursday, December 18, 2014 10:18 AM
>> To: [log in to unmask]
>> Subject: Re: G5rv versas alpha delta etc.
>>
>> Thanks for the reply Bob.
>>
>> I don't really know the difference between the alpha delta and the g5rv.
>> I
>> thought both needed at least some ladder line.
>>
>> Don
>>
>> On 12/18/2014 10:02 AM, Bob Ray wrote:
>>> Don, I have no experience with g5rv antennas but there are a large
>>> number of them in use. I have experience with the alpha delta DXCC
>>> and it works fine on all bands.
>>> It is a bit narrow on 80 meters as any shortened antenna would be.
>>> The reason I went that route was that I thought the ladderline on the
>>> g5rv would open me up to more interference problems. I gather that
>>> isn't the case though.
>>>
>>> 73,
>>>
>>> Bob kd0br
>>>
---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com
|
