BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Russ Kiehne <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Wed, 17 Mar 2010 08:37:06 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (70 lines)
I found the info and posted to the list.
----- Original Message ----- 
From: "tom behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 17, 2010 7:51 AM
Subject: Re: ic-718


>    Russ:
>
> You probably are right. ...  It has been so long since I had the rig, and
> even longer since I set it up. ...  Whatever the case, it can be adjusted,
> which is a good thing.
>
> Thanks for the clarification.
>
> 73 from Tom Behler:  KB8TYJ
>
> ----- Original Message ----- 
> From: "Russ Kiehne" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, March 17, 2010 8:04 AM
> Subject: Re: ic-718
>
>
> The adjustment is on the speech board itself.
> ----- Original Message ----- 
> From: "tom behler" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, March 16, 2010 5:55 PM
> Subject: Re: ic-718
>
>
>>    Butch:
>>
>> I swear there is an adjustment in one of the menus for UT102 volume.
>>
>> I seem to recall having that problem with mine too, but remember 
>> adjusting
>> it.  I had to, because it was a rig that I used for Field Day, and often
>> in
>> our motor home, so needed the volume to be a bit higher than usual.
>>
>> 73 from Tom Behler:  KB8TYJ
>>
>> ----- Original Message ----- 
>> From: "Butch Bussen" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, March 16, 2010 5:54 PM
>> Subject: Re: ic-718
>>
>>
>> I did go to a e s and bought the synthesizer and the i-100 tuner.  I
>> considred getting the at-100, but they didn't have one in stock and I
>> wasn't sure what the up down manual tuning buttons did and all that, so I
>> figured I'd keep it simple, just one button.  On another note, the
>> synthesizer works, but the level seems low.  It is fine if you don't have
>> much signal, but it is covered up by the noise unless I turn the rf gain
>> down.  Any suggestions?  I called a e s and they said no level adjust on
>> the board.  I called icom and they are supposed to call me back.
>>
>> Yep, it is a nice little radio, nice for portable or mobile, just a 
>> simple
>> little rig.
>> 73
>> Butch Bussen
>> wa0vjr
>> open Node 3148
>> Las Vegas 

ATOM RSS1 RSS2