Steve, thank you very much. That worked like a charm. Can I assume the front panel chart from the 590s still applies to the 590g? You've been a great help.
Frank

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]] On Behalf Of Steve Forst
Sent: Friday, January 29, 2016 9:35 PM
To: [log in to unmask]
Subject: Re: TS590g question

Frank,

Reset is the same on both the 590s and 590sg.

You want the a/b button which is to the right of the main tuning knob, second row down and third button from  the left.

Turn the radio off.  Pressand hold  the a/b button while you power up 
the radio.   Release both the power and a/b buttons.  The voice will say 
"Full reset?".  For a full reset, press the a/b button again at this time.  Radio will reset and jump to 14.000.

If you want to do a VFO reset instead, follow the above instructions, but when the voice says "full reset?", turn the multi knob until she 
says "VFO reset?", then hit the a/b button again.   This will reset a 
lot of the radio, but keep menus and memories intact.

73, Steve KW3A



On 1/29/2016 8:45 PM, Frank Ventura wrote:
> Hi all, I have a loaner TS590g for evaluation. I would like to perform 
> a fu= ll reset. The directions on icanworkthis thing for the 590s 
> don't seem to b= e the same. Can anyone give me directions for the 590g, including where the=
>   correct buttons are located? Thanks, as I can't seem to find any 
> documenta= tion for this rig in accessible format.
> Frank
>