Which bios are you running on the BX-2? I'm running MW. When I installed
the drive, I let it auto detect, fdisked and formatted one large partition
and it installed just fine.
Ben Moore
----- Original Message -----
From: "Jose E. Dominguez" <
Sent: Thursday, November 25, 1999 6:33 PM
Subject: [PCBUILD] Error reading fixed disk
> Brand new Deskstar 22GXP 13.5 gig. Installed drive as master on Promise
> Ultra 66 controller, fdisk drive, yes to large disk support, primary
> partition C 10895, extended with the rest of the space, first logical D
> 1024, second logical E with the rest of the space, reboot. The MBs
> numbers may not be right but you get the idea.
>
> At the A prompt enter C it comes up, enter D it comes up, enter E and I
> get "Error reading fixed disk". After this happens I cannot get into
> fdisk, I have to run a debug script to blow the partition table away.
>
> Win98 is the boot disk, FAT32 is the setup. I get this whether the drive
> is on the Promise controller, or on the mobos controller. The board is a
> BX6 rev. 2, not overclocked while setting up. I have tried this on
> another BX6 and another Promise controller with the same results.
>
> Any ideas?
>
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]
|