Help me out, is this plug and play PCI card?  NT or win98?  With win98 and
an ISA card, I had to go into CMOS and under PNP/ PCI set "reset
configuration data?" to enabled and mark the IRQ I was using to legacy ISA
for my SCSI card, which is not an Adaptec but might be the same problem your
having.  Once that worked, win98 saw new hardware and I could load my
drivers.  For my IOMEGA JAZZ PCI, I just enabled "reset configuration data?"
and finished installing the scsi before I set up the sound devices.  That
seemed to work.
Tom Turak


-----Original Message-----
Sent: Monday, August 30, 1999 1:39 AM

I have an Adaptec 1542b host adapter that I had running fine on a PI133 with
5 devices (2 scsi cd-rom, 1 drive (I boot from an ide drive), a zip drive
and a scanner). I have upgraded to a PII400 and now I cannot get the card to
work at all. It is terminated properly. I have tried just using internal and
just using external devices and it absolutely will not work. I have gotten
the error cannot find id#0 lun#0 on bootup sometimes but that is it. It
shows up as a conflict in device manager but there isn't one. I have the
latest drivers, etc. Does anyone have any ideas, I am unable to use half of
my machine because of it. Thanks.

Shawn M. Shea
Microsoft Certified Professional
E-mail - [log in to unmask]

                Curious about the people moderating your
                   messages? Visit our staff web site:
                     http://nospin.com/pc/staff.html