Subject: | |
From: | |
Reply To: | |
Date: | Wed, 7 Jul 1999 11:21:27 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have two Enlight screwless AT Midtower cases....one floppy and four
front 5.5 inch drive bays.
I think what you have done here is slide the bottom drive into the snap in
bay incorrectly....I have made this mistake....something about the first
one from the bottom that doesn't want to slip in right by default. Make
sure your snap in guides are centered correctly and that you are not below
the center...it is not suppose to rest on the bottom.....there should be
bottom clearance. Also make sure you face cover snaps on easily....I have
had to pinch the spring studs so that they will snap in easily. It has
been my experience that if the front face doesn't snap on easily ....you
can not force of jimmy it on.
m
>I'm having an install problem with an (AT) Enlight case.
>I got an EN-6680 Series, P/N 3608944,
>(LP-8006 on card board box exterior).
>Nothing FULLSIZED, like a CD-ROM, a 5.25 floppy, or
>a "factory mounted" LS-120 will "fit" in the lowest front
>external drive bay opening. I think I either got a "bad run"
>of a certain housing part, (#11), or there is an overlooked
>design error. Does/did anyone notice this problem
>with this EXACT case? I have been in contact with
>the factory, but it seems they have "never heard"
>of this "clearance" problem before. Rick Glazier
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|