At 09:09 PM 5/2/99 -0500, you wrote:
>> At 09:58 PM 5/1/99 , you wrote:
>> >I'm building a new system using a Mitsumi D359M3 3.5" FDD. Looking a the
>> >back of the drive, I can only find the number "2" on the PCB at the left
>end
>> >of the 34 pin ribbon cable connector. I expected to find a "1"
>indicating
>> >the pin 1 location. I'm guessing the "2" is there on the PCB because pin
>1
>> >is actually the top pin at the left side of connector and pin 2 is below
>it
>> >closer to the PCB. Can anyone in the group confirm that pin 1 is on the
>> >left side of the connector when looking at the back of the drive for this
>> >model?
>> >
I believe that the numbering is as follows on all drives. I've never seen
one that is different.
1 3 5 ...
2 4 6 ...
That is, the top row are the odd numbered pins and the lower row are the
even numbered pins.
PCBUILD maintains many useful files for download
on our web site - visit our download page at:
http://nospin.com/pc/files.html