Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 2 Mar 2000 19:35:31 -0800 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
On Thursday, March 02, 2000 4:22 PM, "Jerry Rasmussen"
<[log in to unmask]> wrote:
> Patrick,
> Walter did a great job pointing out the security issues concerning your
> second question.
>
> On the question about sharing the IP address among multiple computers,
there
> are many shareware proxy server programs that work fine and can be
> downloaded from ZDNet. I use a program called Sygate (about $30 in
CompUSA
> and other outlets). While this is not a proxy server, it functions in a
> similar fashion. The computer that is connected to the cable modem is the
> server and all other computers are set up as clients.
>
> There is another issue that you should be made aware of though. The
> computer that is connected to the cable modem will have two NICs
installed.
> One for the cable modem, the other to connect to your hub. Some computer
> configurations have serious problems with this. Some brands of NICs are
> particularly finicky about the presence of more than one NIC. You may
have
> to remove your soundcard (if you have one that uses more than one IRQ) to
> install the second NIC. You can then reinstall the sound card afterward.
I
> use NICs from Linksys and have never had a problem.
>
Jerry and James -- Thank the both of you for filling in the issues that you
have posted. With respect to both Sygate and ZoneAlarm, I was going to
mention them both in my initial post because both programs get a lot of high
remarks on other list and are excellent products. I was hesitant about
answering the IP sharing issue because I was confused about what you were
asking. Another good program is Wingate, http://www.wingate.ca/. Jerry has
made some very good additional comments about security measures that all
cable modem and DSL users should employ. Very well written and explained.
:-)
Walter R. Worth
[log in to unmask]
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|