At 09:42 AM 09/23/1999 , Peter Ramins wrote:
>I recently purchased an E-Tech PC56RVP-2 isa 56k modem, non hst. It wasn't
>flashed to v.90 when I got it, but it would connect to my isp fine. After
>flashing it to V.90, I get maybe 1 connect out of 5 or 6 connects.
>
>I went to www.e-tech.com and downloaded the drivers and flasher there,
>re-flashed the modem, installed drivers for it, and the problem still
>persists. In the course of all of this, I lost the failsafe backup (the one
>that connected fine) so I can't fallback on that.
>
>I think ifI can find out the AT command to disable v.90 and just use v.34, I
>should be fine, but AT*MM commands don't work. (Those commands were what
>worked with my last modem.)
>
>Does anyone have a link to a list of AT commands for hayes compatibles, or
>suggestions on an init string?


I cannot remember the AT command for this off the top right now, but
consult John Navas' FAQ on modems, I am sure you will find it there:
http://www.aimnet.com/~jnavas/modem/faq.html

John has been working on this FAQ for as long as we have been around
and it is a remarkable document, everything you would want to know about
modems.

                 Bob Wright
        The NOSPIN Group, Inc
http://nospin.com - http://nospin.org

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]