If one puchased either PC100 or PSC133 SDRAM and installed it in a machine
with a 66mhz bus would this RAM work? Does your motherboard have to be
setup to run at 100mhz or higher? My mobo only has jumpers for 66,75 and 83
mhz but I'm interested in increasing my RAM at this time and buying for the
future at the same time.I would not be concerned about not getting the full
benefit of the newer Ram as this would only be a short term thing until I
can upgrade Mobo.
TIA







>PC100 and PC133 SDRAM considerations
>
>If you are running a PC that is capable of running a 100MHz FSB (Front Side
>Bus) you will need PC100 or PC133 SDRAM.  If your PC is not capable of a
>100MHz FSB you will need 66MHz SDRAM.  For a current list of available PC100
>and PC133 SDRAM DIMMs please see our web site at http://www.crucial.com and
>select "Shop by component".
>

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>