Subject: | |
From: | |
Reply To: | |
Date: | Mon, 31 May 1999 00:10:00 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have 2 systems here at home that are built on the QDI Titanium+ MB
and I have run them with both DIMMs and SIMMs installed. The only issue I
had was overclocking my P233MMX CPU to 266. it didn't like having the
Multiple memory setup and overclocking. other than that it has worked just
fine. I think there are just as many answers as there are Motherboard
Models out there. I would not recommend doing this and I no longer have the
manuals for the MBs. I often try and push systems till they break then back
off just a little. I Can Not recommend that anybody do the things I do but
I will share my EXP with you.
At 12:07 PM 5/30/99 , you wrote:
>My EPoX manual states "... supports standard Fast Page, EDO (Extended Data
>Out or Hyper Page Mode), or synchronous DRAM...." It also states that
>DIMM socket 3 can not be used in conjuction with the two SIMM sockets.
>There is a discussion about RAM speed, but there is no mention of voltages
>and there is no jumper for RAM voltage, so I assume it just does what is
>necessary.
>
>The other two motherboard manuals have similar statements.
>
>Jim Meagher
>=====
>Micro Solutions Consulting Member of The HTML Writers Guild
>http://www.ezy.net/~microsol International Webmasters Association
>410-543-8996 MS Site Builder Network - Level 2 member
>=====
The American Dream does not come to those who fall asleep.
PCBUILD maintains many useful files for download
on our web site - visit our download page at:
http://nospin.com/pc/files.html
|
|
|