I hope I picked out the facts correctly.
You have a Sony IDE Cd drive in a
shuttle using a parallel/scsi host for
parallel port access and you have DOS
drivers loaded.
Try REM-ing your your autoexec.bat
and config.sys commands and reboot.
-yui shin
----- Original Message -----
Jeff Pilch wrote:
(snip)
> I removed the Mistumi
> CR2801TE from the enclosure, and put in its
> place a 2x ATAPI IDE Sony CDU-55E CD-ROM
> drive that I've been using fine for years.
>
> If I boot into DOS, the CDBLAZER driver sees
> the drive correctly as a Sony CDU-55E and
> speedily reads any CD I load into the tray.
>
> If I boot into Win98SE, Device Manager sees
> correctly both the OnSpec SCSI controller and
> the CD-ROM as a Sony CDU-55E.
>I put a CD-ROM into the drive tray, Windows
>Explorer hangs, as the CD-ROM drive's busy
>light stays on.
(snip)
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>