Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 9 Dec 1999 07:30:37 -0500 |
In-Reply-To: |
|
Content-Type: |
text/plain; charset="us-ascii"; format=flowed |
Reply-To: |
|
Parts/Attachments: |
|
|
The fix that Glen suggested was the magic key! With a complete physical
removal and reboot, shutdown, re-install and reboot, the card was
recognized properly and now has a adapter address. It appears to be
working properly. (It was a D_LINK card!) Thanks Glen.
Doug
At 12/8/99 09:59 AM , Glen L. Bowes wrote:
>My guess is that this is actually a D-LINK DE528 PCI NIC. We use these in
>cable modem installations and it's very common for the adapter address to
>become all 0's. If the D-LINK drivers aren't installed, Windows identifies
>the NIC as a Realtek.
>
>D-LINK suggests physically removing the NIC from the system, reboot, shut
>down, and reinstall. If this fails, the adapter is likely no good.
>
>-----Original Message-----
>This is the results of ipconfig /all
>(He only has one physical ethernet card- Realtek):
>
>...
>
> IP Address. . . . . . . . . : 0.0.0.0
>
>...
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]
|
|
|