Subject: | |
From: | |
Reply To: | |
Date: | Tue, 22 Jun 1999 06:07:08 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
This plea for help was originally sent to PCSoft, but it was
suggested that I try to get some advice from the folks at PCBuild
also. So here goes....
"Harold E. Schumacher, Jr." wrote:
>
> Hello again,
>
> I'm trying to re-install WIN95 on a P100 with a re-formatted 1.2GB
> Seagate drive and I'm still getting the following message:
>
> SUWIN caused a General Protection Fault in module
> USER.EXE at 0006:005A
>
> I've worked with various suggestions so far to no avail. To
> review----it's not an overclocked chip, not an old drive, I've
> swapped out the memory, virus checking is disabled in the BIOS and
> the video card is not a Cirrus (it's a Trident).
>
> One thing that I noticed working on it today as opposed to
> yesterday----after clicking on the "Close" button at the bottom of
> the message----the numbers changed at the end. After clicking
> "Close" 3 or 4 more times, the numbers continued to change but then
> the whole screen went to a black screen with the following message:
>
> Standard Mode: Bad Fault in MS-DOS Extender
> Fault: 000D Stack Dump: 0000 0000 0070 Raw Fault Frame: EC=0000
> IP=3AB6
> CS=06EF FL=3202 SP=0000 SS=02C7
>
> This re-format and re-install is certainly not going as smooth as I
> expected!! Can anybody give me any further advice as to what to
> do? I appreciate the input I've gotten already. Thanks for your
> help!
>
Harold E. Schumacher, Jr.
--
***********************
* Know Fear... *
* Proverbs 9:10 *
* <>< *
***********************
Mailto:[log in to unmask]
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|