Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Feb 1999 00:10:46 -0500 |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
Quite often, an overworked keyboard connector becomes electrically separated
from the motherboard due to metal fatigue of the solder joints. It usually
takes a powerful magnifier to see the small circular crack. Another way
of diagnosing this problem is to use a "beeper" or "penlight" type continuity
tester. If pressing the pin at the centre of the open connection to
the side with a small stick suddenly causes it to conduct, then this is
the problem.
Ground yourself (touching the shiny metal of the power supply case before
anything else, as a minimum) to neutralize static. If you use a grounded
wristband, make sure there is a 10 MegOhm resistor in series to protect YOU.
Go ahead and resolder the joint - after all, it doesn't work now - what have
you got to lose? If you try a hot, smaller soldering pencil (say 30 W)
first, with a little ROSIN (NOT ACID) flux and solder, you should be
able to fix it in 10 seconds or less. If not, you may have to use a
slightly more powerful soldering gun. The joint should look smooth and
shiny when cleaned.
Boyd Ramsay
[log in to unmask]
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|