PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: CPU Frequency Selectors
From:
David Olds <[log in to unmask]>
Reply To:
PCBUILD - Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Tue, 3 Nov 1998 22:02:45 -0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
Setting the Motherboard to 66.6 x 4.5 is the safest setting, but I would use
it as a fallback, if all else becomes unstable....Using the 75mhz setting
and PCI bus to 37.5 should work just fine, I have had very good luck using
this setting in the past with great success...

Good Luck,
David Olds

>
>The question that I have, is that this MB has two 75MHz settings. One has
>(PCI 37.5M) under it and the other (PCI 30M) what are these settings for ?
>Would I be better just setting it at 66MHz X 4.5?
>

>
>The question that I have, is that this MB has two 75MHz settings. One has
>(PCI 37.5M) under it and the other (PCI 30M) what are these settings for ?
>Would I be better just setting it at 66MHz X 4.5?
>

                                  -----
                PCBUILD mailing list -  http://nospin.com
         Bob Wright:[log in to unmask] - Drew Dunn:[log in to unmask]

ATOM RSS1 RSS2