Jim:

I don't know your experience level and it may sound simplistic, but
press and hold (four sec?) your ATX power switch for on-off functions.
Check your docs to see the particulars are for your equipment.  The soft
power and suspend functions can really confuse things if you are
thinking in terms of how the AT "hard power switch" works.
HTH.
Eric

Jim Mullen wrote:

> To quote a fellow ABIT installer on the ABIT news group, "I am at my
> wits end." Got a BH6, nice case w/250 watt PS, 64 megs tested to 124 MHz
> and a Celeron 300a  tested to 450 Mhz at 2.2 volts from PC Nut. I have
> seen this problem more than once on the news group and no real solution
> that has worked for me. The basic problem is no post, no beeps and power
> switch must be held closed for many seconds before power is turned off.
> All other components are known good so problems has to be with the
> board, power supply or memory, right?
--
Eric R. Outten 773-978-3478 "typito ergo sum"
[log in to unmask] - Oh! Electronic Solutions, Inc.
8835 S. Clyde Avenue - Chicago, IL 60617-2904

                                  -----
                PCBUILD mailing list -  http://nospin.com
         Bob Wright:[log in to unmask] - Drew Dunn:[log in to unmask]