Subject: | |
From: | |
Reply To: | |
Date: | Wed, 14 Jul 1999 18:47:19 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I have Windows 95 (1st version)
I have a plain floppy drive (1.4) on a floppy cable. I added a 5 1/4 to see what would happen. Now the
5 1/4 shows up as Drive F and as a 3 1/2 floppy. The real 3 1/2 doesn't show up at all under System
in Control Panel. I changed the bios to show that the A: drive is a 3 1/2 and B: is 5 1/4.
I'm ready for more questons. <g>
Rosie Richter
Rick Glazier wrote:
> Several questions pop into mind.
>
> Is this a plain floppy drive (1.4 OR 1.2megs on a floppy cable)?
> Could this be an LS-120 (120megs AND 1.4m on an IDE cable), or similar?
> Which Version of Win95 are you running?
>
> Some of the questions above are inter-related,
> And lead to more questions later...
>
> Rick
>
> ----- Original Message -----
> From: Rosie Richter <[log in to unmask]>
> > I haven't used my floppy drive A in a long time and the other day I went to use it and it was gone!
> > I tried adding new hardware and then I noticed that I had a drive F and still no drive A.
> >
> > I went to the control panel and then to system where it showed that I had one
> > floppy drive. I decided to remove it and reinstall it. However, I still end
> > up with F and and no A. By the way, I can't access F.
>
> PCBUILD's List Owner's:
> Bob Wright<[log in to unmask]>
> Drew Dunn<[log in to unmask]>
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org
|
|
|