I had an Asus P2B board that I had similar problems with.  I believe if you
read the manual it  states it needs PC-100 sdram even if you are running a
66 Mhz bus speed.  I changed the ram and got the PC 100 sdram.  I tried 3
different video cards but had no luck.  I found that the motherboard was
shorting out so I used all plastic spacers which worked for about a week and
it started again.  Since the motherboard was still under warranty I returned
the motherboard for a new one.  The new motherboard worked like a charm the
first time I booted it up with no problems.  It also worked with SDRAM that
wasn't  PC 100 compliant ram.

Mary Wolden
[log in to unmask]

>    I have a Asus P2B Board that is behaving wierd.  (snip) When I power it
on, I hear the fan in the power supply.  The HD
> powers up but I get no video.  I then lose the ability to turn it off by
> the switch.
>
> I tried another video card but no luck there.  This is a brand new case,
> board, Celeron chip and Memory.  I tried my PII-350 chip on the board, no
> luck.  I tried my Ram from the 350, no luck.  I tried the Video from the
> 350, no luck.
>
> If anyone has seen this before or has any suggestions, I would really
> appreciate them.
>
> Thanks,
> Rob

        PCBUILD only works if you contribute. Send your messages
             to be posted to: [log in to unmask]