Subject: | |
From: | |
Reply To: | |
Date: | Mon, 23 Mar 1998 10:52:56 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On 19 Mar 98 at 21:22, Lindstrom, Rick wrote:
> The builder slaved the CD-ROM drive to the hard drive, with both
> on the primary IDE port on the MOBO. Besides the fact that this
> will make it difficult to add another drive at a later time, my
> understanding is that doing it this way will compromise the
> performance of the HD. Something about the IDE port being no faster
> than the slowest device attached to it, which in this case is the
> CD-ROM drive.
IDE/EIDE devices run the channel in various "PIO modes".
Traditionally, the channel would only run at the fastest mode
supported by both devices, and (also traditionally), CD-ROM drives
didn't support much more than mode 1.
Both of these traditions seem to have faded over time. Modern
CD-ROMS support higher PIO modes, and it appears that some modern
chipsets -- this may be tied to UDMA support -- can switch mode
depending on which device is being addressed.
So if this is a new machine (430TX, 440LX?, VP3?), this is probably
not an issue. If it's an older machine AND an older CD-ROM drive,
this might be a concern.
David G
|
|
|