> I haven't ran into this problem, but did a quick calculation that might
> help you. 234 is 66.6*3.5. My guess would be that your motherboard is set
> to 66Mhz instead of 100Mhz, check your manual for a jumper to change this
> setting.
check the speed that you get when you power on the machine. if you get 333
then everything is OK. if not then open your machine and change the bus
speed to 95mhz with the apropriate jumpers. if you are unlucky enough to
have a motherboard that doesn't support 100mhz bus speed the set the clock
ratio to 5.0
good luck
sami
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://nospin.com - http://nospin.org