Subject: | |
From: | |
Reply To: | |
Date: | Wed, 17 Feb 1999 20:24:10 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Sections of the hard drive's magnetic coating are failing.
This is usually a progressively degenerative problem that will continue to
haunt you.
If you can find another drive at a swap meet or flea market, it might be
worth the effort to replace it. (but remember that the interface card and
drive must match)
If not.....
You need to low-level format the drive -- unfortunately, there are too
many cobwebs in that section of my memory to give you accurate details.
There is a location within the BIOS that can be accessed via the DEBUG
program and there are several generic freeware/shareware programs that can
accomplish this. I would check the manufacturer to see if they have a
program.
The low-level format will block out the bad sections. Then you can FDISK,
FORMAT /S, and reinstall your software.
Jim Meagher
=====
Micro Solutions Consulting Member of The HTML Writers Guild
http://www.ezy.net/~microsol International Webmasters Association
410-543-8996 MS Site Builder Network - Level 2 member
=====
-----Original Message-----
From: Dreamer's Den <[log in to unmask]>
>Now, now, don't laugh too loud.
>
>I was given an old 286 with a 40 mb Hard Drive. I would like to
>
The PCBUILD web site always needs good submissions. If
you would like to contribute to the website, send any
hardware tech tips or hardware reviews to:
[log in to unmask]
|
|
|