Subject: | |
From: | |
Reply To: | |
Date: | Tue, 12 May 1998 10:28:31 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
David -
I had problems similar to this. I solved them by using a static IP mapping
in WINS. Generally, if you can connect/map network drives by using the IP
address (\\10.0.0.2\myshare) but not the name (\\mypc\myshare) then it's a
name resolution problem.
If you're not using WINS, then try using the HOSTS file.
HTH,
Phil ([log in to unmask])
> -----Original Message-----
> From: PCBUILD - PC Hardware discussion List
> [mailto:[log in to unmask]]On Behalf Of David Gillett
> Sent: Monday, May 11, 1998 5:41 PM
> To: [log in to unmask]
> Subject: Re: [PCBUILD] Win Networking
>
>
> On 8 May 98 at 16:36, Don Cooley wrote:
>
> > A can see A & C only
> > B can see B & C only
> > C and see C & A & B
> >
> > If C sees them all, why doesn't A & B see each other.
> > A & B Cables and ports and cards would be OK or C could not see
> > them.
> > All set identical in the Network setup.
> > B & C are Win98, A is Win95
>
> If anybody gets that one, I have a strange one here, too.
>
> A is NT WS 4.0 SP3. After uninstalling non-working NFS utility, it
> cannot see "Network Neighborhood" or network print server at all. It
> can, however, still connect to IP addresses....
>
> B is Win95 OSR2. It has a couple of remote volumes from A mapped as
> drives, and these get reconnected when B is rebooted.
>
> C is NT S 4.0 SP3. It cannot see A. It can see B, but none of the
> shares B offers.
>
> B can only see one of the several shares that C offers, and luckily
> has one mapped with R/W access. I can copy things from A to C by
> dragging across mapped volumes on B, but the easiest route to get
> things from C to A is via e-mail....
>
> David G
>
|
|
|