Greetings-

I finally got around to building my first box, although I can't really say
it's built yet because I have a problem (I got by the first problem- bad
RAM DIMM- without too much trouble).

This is an AMD 350 K-6 built on an Aopen AX59 Pro board with the 1 meg cache.

The machine boots up normally, and I can get in to setup with no problem.
Video is good and all that.

When I exit setup and the bootup process continues, I get a "BOOT DISK
ERROR. INSERT SYSTEM DISK AND PRESS ENTER" message. This repaets with a
bootable floppy in the drive.

It appears to be a problem with the floppy, but I'm not sure. Everything
looks to be connected properly, and the floppy is detected in the CMOS
setup. And lastly, I know I have a bootable disk.

Any suggestions?

Thanks-



~~~~~~~~~~~~~~~~~~~~~~~~~
Rick Lindstrom
<[log in to unmask]>
Tallahassee, FL
~~~~~~~~~~~~~~~~~~~~~~~~~

               PCBUILD mailing list is brought to you by:
                            The NOSPIN Group
                            http://nospin.com