I used EZ-Drive on my machine to recognize my 2.5G hard drive. I was
able to put NT 4.0 Workstation on without any problems. I had to FDISK first
and format disk with FORMAT c: /s/u.
                                                                    Wayne
Harris
-----Original Message-----
From: James McGuire <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Sunday, December 13, 1998 8:23 PM
Subject: [PCBUILD] EZ-BIOS and Windows NT Workstation and Server


>I am trying to use EZ-BIOS (that comes with a Western Digital hard drive
>via EZ-Drive) to overcome BIOS limitations on a larger than 520 Mb hard
>drive.  Everytime I install EZ-BIOS, and then install either NT
>Workstation or Server, the installation goes well until it asks you to
>remove all disks and press enter to reboot.  When this happens, as soon
>as the system recognizes the hard drive on bootup, it stops.  No matter
>how many times I reboot, the same thing happens.  Does anyone know of
>any conflict between EZ-BIOS and Windows NT's?  Any help would be
>appreciated.
>
>James
>
>               PCBUILD mailing list is brought to you by:
>                            The NOSPIN Group
>                            http://nospin.com
>

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                        Drew Dunn<[log in to unmask]>