On 5 Aug 98 at 18:33, Raymond Hornung wrote:
> >"Ubiratan C. Peleteiro" <[log in to unmask]> then added:
> >
> > If you changed your board don't forget that the old male DB9 connectors
> > have diferent conection with the flat cable. You must use the connectors
> > that came with your new board.
>
> I don't understand this one...
You got your connectors on the back of the box, and there's a
ribbon cable from each of them to a set of pins on the motherboard,
right?
It turns out that different motherboard manufacturers use different
pin assignments, so you cannot just connectors from one manufacturer
into another's board and expect them to work.
[If you haven't change the hardware recently, this isn't it.]
David G