Sender: |
|
Date: |
Tue, 6 Oct 1998 21:21:54 -0600 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
In-Reply-To: |
<01f301bdf18e$5637f600$4dc2d6cd@hal> |
Content-Type: |
text/plain; charset="iso-8859-1" |
From: |
|
Parts/Attachments: |
|
|
Check the FIC Website at http://www.fica.com. There is an addendum to the
Manual there, that gives the proper jumper settings for this board. If you
still have trouble with the settings, Let me know and I will dig up the
newer settings and send them to you...
This board is indeed capable of 100 mhz bus speed, and unsupported to
112mhz. I think there is even an update out now for 125mhz.
If the Ram you are using is not PC100 Compliant it may not work, but should
not be a problem.
Steve Wolfe.....
> I am trying to build a system with the FIC v503+ mb and the AMD K6-2-300
> CPU.
> I am having trouble setting the jumpers. I seems that the manual doc no.
> 16409, Rev. A3, dated 7, 1998 Part no. 25-10865-03, has wrong or
> conflicting
> information.
> When looking at the mb the diagram showing the jumpers for the SDRAM & the
> FREQ, do not match with that shown in the manual.
> Does any one have any information which one is correct? the manual or the
> mb?
> Does this board & CPU support 100mhz bus speeds?
> How do I achieve the settings for 3x100 to get it to run at 300mhz?
> I can get it to run at 300 mhz using 66mhz and FREQ of 4.5, but
> not 100 mhz
> and 3.3 FREQ. As a matter of fact there is no 3.3 FREQ setting
> shown in the
> manual (on pg.18)
> I am using a "Generic" 64mb SDRAM memory chip with this set-up. Does this
> make a difference?
-----
PCBUILD mailing list - http://nospin.com
Bob Wright:[log in to unmask] - Drew Dunn:[log in to unmask]
|
|
|