-----Original Message-----
From: Timchenko Maxim <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Monday, July 05, 1999 4:44 AM
Subject: [PCBUILD] 6 devices on IDE? [former ATAPI problem]
> Is it really possible to hook :
>
> 1) non-CDROM devices
> 2) two of them
>
> to SoundBlaster's IDE connection? I thought this is not possible!
>I'm confused - please explain.
>
>M.G., which SB do you use?
>
><> Max Timchenko [MaxVT]
><>
><> [log in to unmask]
>
>On Sun, 4 Jul 1999, Michael Gray wrote:
>
>>
>> [Michael Gray] The instructions that came with my Zip disk said to
>NOT have the drive autodetected. I recently had to reinstall win98
>and haven't reinstalled my zip and Sparq drives, but they were
>working fine before. I've got 6 IDE drives hooked to my system
>(2 hard drives master and slave on the first motherboard slot, a CD-RW
>and standard CD as master and slave on the second slot and the zip and
>Sparq hooked to the connector on my Soundblaster.)
>
> PCBUILD maintains hundreds of useful files for download
> visit our download web page at:
> http://nospin.com/pc/files.html
>
There's also a fourth I/O address that can be used to have up to eight
IDE drives in your system.
170-Primary
370-Secondary
168-Teriary
1E8-Quadinary
Although other addresses can be used as long as you can get the controller
card to work at that particular address. You also have to have a seperate
IRQ
for each of the addresses used.
Winston
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://nospin.com/pc/files.html