I did use heatsink grease but there was no "pad" with the heatsink.
At 10:19 29/12/98 -0500, you wrote:
>David,
>When you installed the heatsink onto the CPU, did you use both the pad
>attached to the heatsink (if it came with one attached) and heatsink grease?
>If so, removing the pad and using a thin layer of heatsink grease should
>lower the temp by about 9 degrees Centigrade.
>
>Jerry Rasmussen
>=============================
>
>-----Original Message-----
>From: PCBUILD - Personal Computer Hardware discussion List
>[mailto:[log in to unmask]]On Behalf Of Kate Strong
>Sent: Monday, December 28, 1998 5:58 PM
>To: [log in to unmask]
>Subject: Re: [PCBUILD] Cooling ATX cases
>
>>
>>Dave Perry wrote:
>>
>>> I've just built a computer using an ATX case from Chenbro.
>>> I had read that the ATX cooling system was superior to the Baby At but I
>>> have been watching the Asus PC probe monitor my motherboard and its
>running
>>> at 47 degrees celsius or 117 farenheit.
>>
>
> PCBUILD's List Owner's:
> Bob Wright<[log in to unmask]>
> Drew Dunn<[log in to unmask]>
>
>
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html