Disable Multi-Lun support function in SCSI Adapter's BIOS.


-----Original Message-----
From:   PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]] On Behalf Of Mark C. Barron
Sent:   Monday, September 14, 1998 2:13 AM
To:     [log in to unmask]
Subject:        Re: [PCBUILD] Adaptec Scsi controller with CDROMS

The problem appears to be with he ASPICD.SYS device driver.

Here is the screen display from a typical boot up on this system...

DEVICEHIGH=C:\SCSI\ASPI2DOS.SYS /D /Z

AIC-6260/6360/6370 ASPI Manager for DOS
Version 3.68
Copyright 1990-1997 Adaptec, Inc.

        Host Adapter #:         0                       Host Adapter SCSI
ID:   7
        I/O Port Address:       340                     DMA Channel:
0
        Interrupt Level:                11                      Transfer
Mode:                  PIO
        Parity Checking:        Enabled LUN Support:
Disabled
        Disconnection:          Enabled Sync Negotiation:
Enabled

        Host Adapter #0 - SCSI ID 0 - LUN 0: Quantum Lightning 730S
2.41E
        Host Adapter #0 - SCSI ID 3 - LUN 0: Matshita CD-ROM CR-5XX     1.0b
        Host Adapter #0 - SCSI ID 5 - LUN 0: Matshita CD-ROM CR-5XX     1.0b

        Int 13H active for Drive(s):    C:

Int 13H routed through ASPI Manager.
ASPI2DOS.SYS Installation Successful

DEVICEHIGH=C:\SCSI\ASPICD.SYS /D:LARRY1

ASPI CD-ROM Driver for DOS
Version 4.01
Copyright 1990-1996 Adaptec, Inc.

        Host Adapter 0, Target SCSI ID=3 - LUN 0: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 1: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 2: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 3: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 4: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 5: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 6: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=3 - LUN 7: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 0: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 1: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 2: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 3: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 4: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 5: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 6: MatshitaCD-ROM CR-5XX 1.0b
        Host Adapter 0, Target SCSI ID=5 - LUN 7: MatshitaCD-ROM CR-5XX 1.0b

CD-ROM Driver Installed: 1 host adapter(s), 16 targets.

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>