David,
When you installed the heatsink onto the CPU, did you use both the pad
attached to the heatsink (if it came with one attached) and heatsink grease?
If so, removing the pad and using a thin layer of heatsink grease should
lower the temp by about 9 degrees Centigrade.
Jerry Rasmussen
=============================
-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Kate Strong
Sent: Monday, December 28, 1998 5:58 PM
To: [log in to unmask]
Subject: Re: [PCBUILD] Cooling ATX cases
>
>Dave Perry wrote:
>
>> I've just built a computer using an ATX case from Chenbro.
>> I had read that the ATX cooling system was superior to the Baby At but I
>> have been watching the Asus PC probe monitor my motherboard and its
running
>> at 47 degrees celsius or 117 farenheit.
>
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>