Subject: | |
From: | |
Reply To: | |
Date: | Wed, 16 Sep 1998 10:07:30 +0200 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
If the rest of the fans push air in, you should put a fan pulling air out,
where suggested, and help it circulate. If not your case will inflate and
may explode.
If you are really concerned, and have a Voodoo2 or similar, you can place a
processor fan, without the sink, in front of the video chips, blowing air to
them. You can use a piece of metal and nylon ties, or whatever, to fix it.
The aim of all this is expected life: if with your cooling it is expected to
last 9^(9^9) years, you can make it last
9^( 9^(9^9)) years.
BTW: now my mobo is at 35C and the MMX200 (at 3x75) at 65C.
************************************
Javier Vizcaino. Ability Electronics. [log in to unmask]
Starting point: (-1)^(-1) = -1
Applying logarithms: (-1)*ln(-1) = ln(-1)
Since ln(-1) <> 0, dividing: -1 = 1 (ln(-1) is complex, but exists)
-----Mensaje original-----
De: Ben Moore <[log in to unmask]>
>I posted earlier about a hard drive problem and one of my concerns was the
>temps inside my case. They normally run 48 degrees C, 118 F but can go up
6
>or 7 more degrees if I'm really pushing the video card. I have a power
>supply fan and a CPU fan. I'm thinking about adding another fan. The
>problem is where? I have a generic mid tower ATX case. It has a air
intake
>grill, I assume, on the front of the case. Behind that inside is a plastic
>housing that looks like a fan housing but of course there is no fan. Is
>this where I could add a fan? Should it blow in or out? Thanks.
>
>Ben Moore
-----
**Need help with PCBUILD mailing list? Send an Email to:**
Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>
|
|
|