--Well Eric,
What you said made me get up and look again,however,there are no pins bent
or in contact with each other or the metal housing,so I can't imagine what
is causing the problem.Could it have anything to do with what's inside the
machine?Is there some way that when I connect the cable to the 'puter that
so ething inside of it shorts?
Thanks(to everyone),
Tony
>Pardon us for redundancy, but the VERY likely reason for what you
>describe is shorted pins. Not just bent (although that IS what Paul and
>I said). Sometimes they are flattened to 90 degrees of their proper
>position and laying against other pins. If you don't look carefully
>into the connector, it ~can~ be missed. It can't hurt to be aware of
>this (for ALL of us, cause it's common), and I've salvaged monitors
>tossed by "experts" for it. It can't hurt to check again...
>HTH,
>Eric
>Paul A. Shippert wrote:
>>
>> Greetings, Tony et. al.--
>> -----Original Message-----
>> From: TONY LODGE <[log in to unmask]>
>>
>> >replacing the cable that connects the monitor to the
>> >video card?
>>
>> >No I didn't do that as it is one of those types that are
>> permanently
>> >attached.Up to this however it has worked fine,no problems at
>> all.
>> >Tony
>>
>> I believe another poster may have suggested this, but are all the
>> pins inside the coupler (of the connecting cable from monitor to
>> PC) straight, unbroken, and not in contact with the metal housing
>> (causing a short there)?
>>
>> HTH,
>> Paul A. Shippert Library/Media Specialist
>> " . . . and I'm hovering like a fly
>> waiting for the windshield on the freeway." Genesis
>> [log in to unmask]
>>
>> PCBUILD only works if you contribute. Send your messages
>> to be posted to: [log in to unmask]
>
>--
>Eric R. Outten 773-978-3478 "typito ergo sum"
>[log in to unmask] - Oh! Electronic Solutions, Inc.
>8835 S. Clyde Avenue - Chicago, IL 60617-2904
>
> PCBUILD maintains many useful files for download
> on our web site - visit our download page at:
> http://nospin.com/pc/files.html
>
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|