At 16/09/98 01:04, you wrote:
>On Sun, 13 Sep 1998 11:13:05 -0700, you wrote:
>
>First, I want the original poster confirms that he has one or two
>CD-ROM drives? If just one only, which ID you've actually configured?

There are two physical CD-ROm drives on the chain.

>Second, try to enable the LUN support option in your SCSI adapter.
>Because I noticed the ASPICD.SYS cannot issued just one DUN for each
>ID, but gave you each DUN for your ID instead.

I have tried this way back and it made no difference...

I have finally had to go to another brand of SCSI adapter.  A Bus Logic
BT-542B.

This card shows the say type of problem upon initializing the cards driver,
but when
the CD-ROM driver is loaded, it correctly configure to only two CD-ROM drives.

The Bus Logic card is a discontinued card we found in our spare parts pile.

Go figure....

Thanks for everyones suggestions....

Mark

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>