Subject: | |
From: | |
Reply To: | |
Date: | Wed, 16 Sep 1998 08:04:21 GMT |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On Sun, 13 Sep 1998 11:13:05 -0700, you wrote:
No, it seemed it was the CD-ROM drive problem or incorrect SCSI
configuration. Anyway, here are some suggestions that the original
poseter can try:
First, I want the original poster confirms that he has one or two
CD-ROM drives? If just one only, which ID you've actually configured?
Second, try to enable the LUN support option in your SCSI adapter.
Because I noticed the ASPICD.SYS cannot issued just one DUN for each
ID, but gave you each DUN for your ID instead.
>The problem appears to be with he ASPICD.SYS device driver.
(....)
> Parity Checking: Enabled LUN Support: Disabled
> Disconnection: Enabled Sync Negotiation: Enabled
(....)
> Host Adapter #0 - SCSI ID 3 - LUN 0: Matshita CD-ROM CR-5XX 1.0b
> Host Adapter #0 - SCSI ID 5 - LUN 0: Matshita CD-ROM CR-5XX 1.0b
Regards,
Michael
-----
**Need help with PCBUILD mailing list? Send an Email to:**
Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>
|
|
|