Raymond Hornung wrote:
>
> I cannot get my computer to recognize my serial mouse.  I'm running
> WIN95 on a FIC PA-2002 with a pentium 166 CPU.  The motherboard has
> on-board com ports, I've tried configuring the BIOS to recognize each
> one as COM1 (in the event one was bad) without luck. The board has a row
> of 5 pins that say MS_JMP on one end and PS/2_JMP on the other.  The
> manual gives no jumper setting for these, it only acknowledges them in
> the diagram.  Any ideas?
>
> Ray Hornung

If you changed your board don't forget that the old male DB9 connectors
have diferent conection with the flat cable. You must use the connectors
that came with your new board.

Ubiratan.