I don't think the attachment made it. Which of these radios talks?  The 
Tytera or the connect system?

-----Original Message----- 
From: Angelo Sonnesso
Sent: Saturday, December 31, 2016 10:33
To: [log in to unmask]
Subject: Re: DMR radios

I am putting the basic instructions in the message.
The attachment has the same information, but It also shows you how we set up
the rig.
Tell me more about your setup.

Directions for using Tytera MD-380
  Rig has 16 keys on the front
  We will use the top row from left to right referred
to as Key 1, key 2, key 3, and key 4

  To change zones: 1. Press key 1 once
2. Press key 3 twice 3. Press key
1 once 4. Press key 2 to go up in zone /
press key 3 to go down in zone 5. Press key
1 to confirm zone 6. Exception is when zone is
set to analog 7. When in analog zone, to
change zones press key 1 once, then press
key 3 once and then key 1 to confirm entry to
zones- then press key 1 to go up in zone and key
3 to go down- press key 1 to confirm zone set
  Whenever you program the radio by writing to the
radio with the software, the default position is to return the
radio to the Simplex zone. You can then go from
Simplex to any other zone.


73 N2DYN Angelo

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Don Breda
Sent: Saturday, December 31, 2016 7:16 AM
To: [log in to unmask]
Subject: Re: DMR radios

Hi Angelo.


Please send me that file, would like to have a look.


I have a cs-750 which I made talk. Its really nice.


There are bugs in the firmware and cps thogh that can get you but they will
be fixed and even thgough  its nice to know where you are without having to
memorize or come up wiwht a system to layout the channels in a wayyou can
remember.


Don



On 31-Dec-16 1:39 AM, Angelo Sonnesso wrote:
> I have a MD380, and if you use the software you will have no trouble
> If you get one let me know and I will send you a file with the keypad
> instructions.
>
>
> 73 N2DYN Angelo
>
> -----Original Message-----
> From: For blind ham radio operators
> [mailto:[log in to unmask]]
> On Behalf Of ray t. mahorney
> Sent: Thursday, December 29, 2016 6:10 PM
> To: [log in to unmask]
> Subject: DMR radios
>
> Anyone here using them and what success have you had with the radio
> the = software or both Looking at the tytera md-380 HT.
> Ray T. Mahorney
> WA4WGA


Ray T. Mahorney
WA4WGA