Subject: | |
From: | |
Reply To: | |
Date: | Sat, 7 Feb 1998 21:36:15 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Make sure the power supply is on 115 Watts or whatever. When this is wrong,
you can get just a blank screen. Also check your graphics card in another
computer, and if it works make sure it is seted firmly in the slot (PCI I
presume?). If it still does not work, try it in a different slot. If none
of this works, it might be your ram, or even you motherboard. Try them in a
different computer.
Chuck H.
> Ladies and Gentlemen of the list:
> I have followed PCBuild for sometime and thought that with the help of
the
> many knowledgeable people reading the list I would attempt building my
own
> computer. This is my first post of many I'm sure. I have purchased an MTI
> Mustang R548 mainboard, 32 meg of EDO memory, a 200mhz mx Cyrix processor
> and an AWE Graphics Blaster video card. According to the info I have I
> should hook up the power supply to the mainboard, install the memory and
> video card and connect the monitor, which I have done. I checked the
jumper
> settings and powered it up but did not get any display on the monitor as
I
> expected. I was led to believe that I should see the BIOS of the video
> card and system and then a memory count but this was not the case. The
> power light on the monitor blinked as if nothing had been turned on in
the
> computer so I checked it with another computer and it (the monitor)
worked
> fine. I'm not sure if this is the correct procedure or not but I would
> appreciate any guidance or suggestions at this point. Thank you for your
> time!
> Ed Richardson
> [log in to unmask]
PCBUILD: http://nospin.com or [log in to unmask]
|
|
|