there are 4 pin xlr type, though they are not common...the common type is
the 3pin variety.
The 4 pin may be called something else, or just xlr...the 3pin xlr connecter
has been out for many decades though so nothing has changed, and the 4 pin
has been out since at least the 60's as I had an old guitar amp that used a
4pin xlr to connect the head to the cabinet...and now that I think about it,
they reversed the standard configuration and the cabinet had the male
connecter for input instead of the standard opposite of that.
73
Colin, V A6BKX
-----Original Message-----
From: Steve Forst
Sent: Wednesday, August 26, 2015 2:22 PM
To: [log in to unmask]
Subject: Re: Heil CC1-XLR
Mike,
I'm no audio guy, and have little experience with XLR connectors.
However, in 2001 when I got my Goldline mic as a free promotion, it
came with a long cable with XLR female on one end to connect to the mic
and 8 pin round for the radio end with the 1/4 jack for ptt.
The XLR connectors were 4 pin and didn't match up with anything else I
had in the shack. Don't know if this is a different standard, an
oddball, or something peculiar to Heil. Again, I don't know much about
this stuff, and it was 15 years ago. Maybe different today.
If you plan on mixing the Heil cable with another mic, I would
confirm that things will match up before spending the money.
73, Steve KW3A
On 8/26/2015 3:57 PM, Colin McDonald wrote:
> if the connecter is on the microphone, it'll be a 3pin male...in the XLR
> world, audio signal output is always XLR male, and input is always Female.
>
> 73
> Colin, V A6BKX
>
>
> -----Original Message-----
> From: Michael Ryan
> Sent: Wednesday, August 26, 2015 1:26 PM
> To: [log in to unmask]
> Subject: Heil CC1-XLR
>
> Hi all:
>
> Is the 3 pin XLR connector on the CC1 a male or female? The mics I'm
> looking
> at are all 3 pin XLR male.
>
> TNX and 73:
> Mike DE VO1AX
>
|