Just hope I didn't miss anything. Good luck.--Matt, N1IBB.
At 01:42 PM 11/10/2015, you wrote:
>Thanks Matt. This helps me a lot. Smiley.=20
>
> Sent from my iPhone
>
> > On Nov 10, 2015, at 1:33 PM, Matthew Chao <[log in to unmask]> wrote:
> >=20
> > Hi, Linda. To set PL:
> >=20
> > 1. Make sure the radio's PL is turned on. If you keep pressing the=20
> > PL key (third button in from the left), you'll hear a series of=20
> > beeps. The lowerst of the beeps means that PL is off.
> >=20
> > 2. When you hear the lowest tone beep, press the PL button one more=20
> > time, and you'll hear a higher tone.
> >=20
> > 3. Make sure you're in VFO mode.
> >=20
> > 4. find the freq you want and make sure you have the proper offsets.
> >=20
> > 5. Press the Function button, followed by the PL key. (The Function=20
> > button is the second button in from the left).
> >=20
> > 6. Turn/click the far left outside knob to the right or left. As=20
> > you do this, the radio will announce the PL tone on each click.
> >=20
> > 7. Once you get the PL you want, press the PL key again.
> >=20
> > 8. Press Function, select the memory channel you want, then press MR.
> >=20
> > Hope this helps. That's what I do from scratch.--Matt, N1IBB.
> >=20
> > At 11:52 AM 11/10/2015, you wrote:
> >> Hi all,
> >>=20
> >> could someone Pretty please refresh my memory on how to set the pl tone o=
>n a=3D
> >> frequency as I've not done it in a while and there has been so much going=
> o=3D
> >> n here.
> >>=20
> >> I get confused as to which button is which.=3D20
> >>=20
> >> My husband had completed his first round of chemo and radiation for Stag=
>e I=3D
> >> II lung cancer.
> >>=20
> >> Now we will have a PET scan in less than 2 weeks and then maintenance che=
>mot=3D
> >> herapy.=3D20
> >>=20
> >> Thanks for any help.
> >>=20
> >>=20
> >> Sent from my iPhone=3DThanks Matt. this helpsl lots. Smiley.
|