Subject: | |
From: | |
Reply To: | |
Date: | Tue, 10 Nov 2015 13:42:47 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Thanks Matt. This helps me a lot. Smiley.
Sent from my iPhone
> On Nov 10, 2015, at 1:33 PM, Matthew Chao <[log in to unmask]> wrote:
>
> Hi, Linda. To set PL:
>
> 1. Make sure the radio's PL is turned on. If you keep pressing the
> PL key (third button in from the left), you'll hear a series of
> beeps. The lowerst of the beeps means that PL is off.
>
> 2. When you hear the lowest tone beep, press the PL button one more
> time, and you'll hear a higher tone.
>
> 3. Make sure you're in VFO mode.
>
> 4. find the freq you want and make sure you have the proper offsets.
>
> 5. Press the Function button, followed by the PL key. (The Function
> button is the second button in from the left).
>
> 6. Turn/click the far left outside knob to the right or left. As
> you do this, the radio will announce the PL tone on each click.
>
> 7. Once you get the PL you want, press the PL key again.
>
> 8. Press Function, select the memory channel you want, then press MR.
>
> Hope this helps. That's what I do from scratch.--Matt, N1IBB.
>
> At 11:52 AM 11/10/2015, you wrote:
>> Hi all,
>>
>> could someone Pretty please refresh my memory on how to set the pl tone on a=
>> frequency as I've not done it in a while and there has been so much going o=
>> n here.
>>
>> I get confused as to which button is which.=20
>>
>> My husband had completed his first round of chemo and radiation for Stage I=
>> II lung cancer.
>>
>> Now we will have a PET scan in less than 2 weeks and then maintenance chemot=
>> herapy.=20
>>
>> Thanks for any help.
>>
>>
>> Sent from my iPhone=Thanks Matt. this helpsl lots. Smiley.
|
|
|