BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Type:
text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
Date:
Sun, 22 Nov 2015 16:07:48 -0600
Reply-To:
For blind ham radio operators <[log in to unmask]>
Subject:
MIME-Version:
1.0
Message-ID:
<DA478B670FF24CF18AC18CD46F3F77D2@lenovo>
Content-Transfer-Encoding:
7bit
Sender:
For blind ham radio operators <[log in to unmask]>
From:
"Howard, W A 9 Y B W" <[log in to unmask]>
Parts/Attachments:
text/plain (89 lines)
Tom,

I am using said Kenwood power supply with my TS-590.  It was originally 
purchased to go with my TS-570.

Both radios are 100 watt radios.

Howard #3
W A 9 Y B W


----- Original Message ----- 
From: "Tom Behler" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, November 22, 2015 3:04 PM
Subject: Question On Kenwood PS53 Power Supply


> Hello, everyone.
>
>
>
> I think I'm becoming more and more convinced that something might be going
> wrong with the trusty Astron RS35 linear power supply that I have been 
> using
> here in the home shack for the past 18 years.
>
>
>
> Today, I had my XYL check the meters on the supply when keying up in RTTY
> mode with 100 watts with my TS590, and the meters on the supply read 14
> volts, with only a draw of 11 amps.  I did this on a frequency for which 
> my
> DXCC antenna is resonant on 40 meters.  My SWR was 1.0 to 1, both 
> according
> to  the TW1 and the meter on the TS590.  I then checked my output power
> reading.  According to the TW1, it was 57 watts, and according to the 
> TS590
> meter, the output power was 75 watts.
>
>
>
> After our lenghthy discussions several weeks ago, when I noticed output
> power problems with my TMV71A, I tried my best to clean all DC power
> connections.
>
>
>
>
>
> My next step will be to try another power supply, just to see if that 
> makes
> a difference, which brings up a question.
>
>
>
> Does anyone on list have a Kenwood PS53 power supply?  I obtained this
> supply from an estate sale several years ago, and I think it is meant to 
> be
> used with the Kenwood TS570, which I also obtained at that time.
>
>
>
> I had my XYL check the power draw ratings on the supply, and she told me 
> it
> says 16 amps.  This seems a bit low to me, and may not be adequate for the
> TS590 on the full 100 watts.
>
>
>
> If anyone has accurate power draw ratings, or an accessible manual for the
> PS53 supply, I'd appreciate the additional info.
>
>
>
> I'm hoping to do some further experimenting with all of this during the
> upcoming Thanksgiving break.
>
>
>
> Tom Behler: KB8TYJ
>
> 


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com

ATOM RSS1 RSS2