BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Dave Allen <[log in to unmask]>
Reply To:
Date:
Sun, 1 Nov 2015 13:53:32 +1300
Content-Type:
text/plain
Parts/Attachments:
text/plain (133 lines)
Hi again Wayne!

There may well be laws within your body corporate prohibiting your even
suggesting anything outdoors on your common property, so that will be your
first hurtle to get around. Depending on your circumstances and the likely
restrictions, perhaps only moving would release you from the restrictions.
Traditionally, body corps are not ham friendly, but then occasionally, I
have heard of exceptions here also. If yours is the standard body corp,
you're fighting a losing battle on the hf front. Then again, if you want to
go stealth, that can be rewarding also in what you can learn and be rewarded
in kind in other ways. If your discovered, obviously, there are
consequences, hi hi.

Just learned the XYL hasn't got braille working on Jaws, so I've got a job
to do.

   

73,
Dave  

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Wayne Genz
Sent: Sunday, 1 November 2015 12:51 p.m.
To: [log in to unmask]
Subject: Re: hello

Hello Pat, yes this was a great help. I can now talk with my corporation
manager intelligently about what I want to do. I hope more people chime in,
any and all info is appreciated. 73 Wayne kd2jpq

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Pat Byrne
Sent: Saturday, October 31, 2015 6:15 PM
To: [log in to unmask]
Subject: Re: hello

Towers come in all flavors.  The one I have experience with was an U S Tower
which came in ten foot sections.  Mine had a base section which went in to a
concrete base in the ground and then five ten foot sections above that, but
a person could use as few or as many sections as they wanted.  At the top my
rotator mounted in to the center of the triangle formed by the three sides
of the tower, then the rotator with a mastt on its top and the antenna on
the mast.  I had a bracket on the mast where it passed the eave on the house
and the bracket held the tower in place at that point.  I needed no guy
wires on that installation.
I believe that Rohn tower comes in eight foot sections but I would need
someone using that style to check me on that.
There are telescopic masts in various lengths and there are tripods that
could either be ground mounted and a mast coming out of the center or roof
mounged with the same mast out the top.
There are a load of ways to go with this Wayne.  I'm sure others on the list
will address your questions.
Hope this helps.
Pat, K9JAUAt 02:53 PM 10/31/2015, you wrote:
>Hello Pat, The info is good, but what is the shortest tower, the place 
>I live in is about 20  feet high. The manager of the corporation is 
>kinda funny, hot and cold.
>
>-----Original Message-----
>From: For blind ham radio operators
>[mailto:[log in to unmask]]
>On Behalf Of Pat Byrne
>Sent: Saturday, October 31, 2015 3:35 PM
>To: [log in to unmask]
>Subject: Re: hello
>
>Wayne,
>A Yagi antenna is tried and true and would do a good job for you.  
>Ideally the antenna would be several feet above any buildings and as 
>far in the clear from trees and other obstacles as possible.  And, the 
>feed line should be good quality coax.  That should be good for starters.
>Hope this helps.
>Pat, K9JAUAt 02:30 PM 10/31/2015, you wrote:
> >Hello Tom, I do not have a lot of money, I for all practical purposes 
> >I have no vision. Need the VGS chip.
> >
> >-----Original Message-----
> >From: For blind ham radio operators
> >[mailto:[log in to unmask]]
> >On Behalf Of Howard, W A 9 Y B W
> >Sent: Friday, October 30, 2015 9:00 PM
> >To: [log in to unmask]
> >Subject: Re: hello
> >
> >Hi Wayne,
> >
> >Welcome to this great list.  Occasionally, some of us get a little 
> >cantankerous but that usually blows over in a short time.
> >
> >This is Howard Thomas, W A 9 Y B W, located in Springfield, Illinois.
> >I've been licensed since 1968.
> >
> >Before we can give you much guidance on a rig, we need to know a 
> >little about what you can afford and if you have enough usable vision 
> >to read the radio controls and display or not.
> >Do you live in a house with a yard where you can put up antennas or 
> >you in an apartment or condo where you will be severely limited on 
> >antenna
>options.
> >
> >Look forward to your feedback.
> >
> >73
> >
> >Howard #3
> >
> >p.s.  I am referred to as Howard #3 since there are two other Howards 
> >on this list.
> >
> >----- Original Message -----
> >From: "Wayne Genz" <[log in to unmask]>
> >To: <[log in to unmask]>
> >Sent: Friday, October 30, 2015 6:16 PM
> >Subject: hello
> >
> >
> > > Hello all, my name is Wayne Genz. I live in NNew Jersey. I'm new 
> > > to the list and am a recent licensee. I have about 2 years 
> > > background in electronics.I served in the Navy for 5 years. I am 
> > > looking for some equipment, I need it tobe able to handle all of 
> > > the wave lengths. This is because I am looking to join the AF MARS 
> > > operations. I was told I could learn a lot  from you guys.
> > > Lookforward to talking to youall.
> >
> >
> >---
> >This email is free from viruses and malware because avast! Antivirus 
> >protection is active.
> >http://www.avast.com

ATOM RSS1 RSS2