Great description Matthew, Jim WA6EKS

 ----- Original Message -----
From: Matthew Chao <[log in to unmask]
To: [log in to unmask]
Date sent: Tue, 10 Nov 2015 13:33:06 -0500
Subject: Re: Help in setting pl tone on Tmv71A

Hi, Linda.  To set PL:

1.  Make sure the radio's PL is turned on.  If you keep pressing 
the
PL key (third button in from the left), you'll hear a series of
beeps.  The lowerst of the beeps means that PL is off.

2.  When you hear the lowest tone beep, press the PL button one 
more
time, and you'll hear a higher tone.

3.  Make sure you're in VFO mode.

4.  find the freq you want and make sure you have the proper 
offsets.

5.  Press the Function button, followed by the PL key.  (The 
Function
button is the second button in from the left).

6.  Turn/click the far left outside knob to the right or left.  
As
you do this, the radio will announce the PL tone on each click.

7.  Once you get the PL you want, press the PL key again.

8.  Press Function, select the memory channel you want, then 
press MR.

Hope this helps.  That's what I do from scratch.--Matt, N1IBB.

At 11:52 AM 11/10/2015, you wrote:
Hi all,

could someone Pretty please refresh my memory on how to set the 
pl tone on a=
  frequency as I've not done it in a while and there has been so 
much going o=
n here.

I get confused as to which button is which.=20

My husband  had completed his first round of chemo and radiation 
for Stage I=
II lung cancer.

Now we will have a PET scan in less than 2 weeks and then 
maintenance chemot=
herapy.=20

Thanks for any help.


  Sent from my iPhone=