Subject: | |
From: | |
Reply To: | |
Date: | Sun, 2 Aug 2015 16:39:20 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
On my last post:
If Ron has a new "just out of the box" 590, I would guess it is the new
SG (or whatever it is) that replaced the 590S. If that is the case,
the menus may not line up between the 2 versions.
Although there is probably a TX lockout menu in the new version, it
might be a different number than 74.
73, Steve KW3A
On 8/2/2015 4:33 PM, Steve Forst wrote:
> Usually single band not transmitting is DRV function activated.
>
> There is a TX lockout in menu 74, but in Ron's case a full reset would
> have defaulted back to "off" if in fact it had been turned on.
>
> From the manual:
> Busy Lockout prevents the transceiver from being placed in transmit mode
> if the current operating frequency is busy; in other words, if the
> squelch is open, you cannot transmit.
>
> • Busy Lockout OFF: Transmission is allowed.
>
> • Busy Lockout ON: Transmission is not allowed.
>
> Switch this function ON or OFF via Menu No. 74. The default is OFF.
>
>
>
> 73, Steve KW3A
>
>
> On 8/2/2015 4:15 PM, howard kaufman wrote:
>> Ron's problem is slightly contagious.
>>
>> My radio stoped tuning or transmitting on 40 meters.
>>
>> It didn't matter which port or tuner I used.
>>
>> Reset and things worked.
>>
>> I vaguely remember something in the manual about transmitter lockout, but
>> can't remember more.
>>
>>
>>
>>
>>
>> Howard Kaufman MSW LCSW
>>
>>
>>
>>
>>
>
>
>
|
|
|