I used to have the THF6A and remember how to work with that, it should set
offset automatically though on 2 meters. My wife has a Baofeng UV5R if
that's close to the same, I programmed that one by hand for her, not sure on
the other one. The TH-F6A though should program the offset for you unless
you shut that feature off. If you hear it on the other radios it's not set
for any offset. It should be set for a plus offset.
----- Original Message -----
From: "Ashley Bernard" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 14, 2015 9:44 PM
Subject: Re: What am I not doing?
> I=E2=80=99ve got a Baofeng UV82, Puxung 973 and a kenwood THF6A
>> On Jul 14, 2015, at 9:43 PM, John Miller <[log in to unmask]> wrote:
>>=20
>> If the radios are hearing each other, you don't have the offset set =
> right or=20
>> at all. Which radios are they?
>> ----- Original Message -----=20
>> From: "Ashley Bernard" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, July 14, 2015 9:30 PM
>> Subject: Re: What am I not doing?
>>=20
>>=20
>>> Well, my next goal is possible a mobile, but seeing as I have just =
> about =3D
>>> no money that won=3DE2=3D80=3D99t happen anytime soon hi hi! I moved =
> to =3D
>>> Norwood MA and am trying to get into the repeater here. I heard the =3D=
>
>>> greater part of a net tonight over there but I wasn=3DE2=3D80=3D99t =
> herbal. =3D
>>> The PL is definitely as I set it, all batteries are charged. I will =
> take =3D
>>> a look at the offsets=3DE2=3D80=3DA6 maybe I changed something along =
> the way. =3D
>>> It seems as though my radios can hear each other but not be heard on =
> the =3D
>>> repeater=3DE2=3D80=3DA6 Almost as though I have some strange simplex =
> thing =3D
>>> going on rather than what I=3DE2=3D80=3D99m trying to do.
>>> Anyway 73.
>>> KC1CPS
>>>=20
>>>> On Jul 14, 2015, at 9:12 PM, Pat Byrne <[log in to unmask]> wrote:
>>>> =3D20
>>>> Ashley,
>>>> John is right. Perhaps the P L tone has been changed. Just to =
> be=3D20
>>>> sure of your gear, remove the antenna from one of the handhelds =
> and=3D20
>>>> listen to the input of the repeater and be sure that you can hear =
> the=3D20=3D
>>>=20
>>>> other handhelds in your stable. Then replace the antenna on the=3D20
>>>> receiving handheld, remove the antenna from one of the ones you =
> have=3D20=3D
>>>=20
>>>> proved and then check the output of the third H T. Good luck and=3D20=
>
>>>> keep increasing your handheld tribe!!
>>>> pat, K9JAUAt 07:15 PM 7/14/2015, you wrote:
>>>>> Evening.
>>>>> So I just moved, and finally got back on air after a few months or =
> =3D
>>> so. =3D3D
>>>>> I=3D3DE2=3D3D80=3D3D99ve found a local repeater and tuned all three =
> of my =3D
>>> HTs to the =3D3D
>>>>> appropriate channel and PL tone. Thing is, for some reason I can =
> hear =3D
>>> =3D3D
>>>>> everything perfectly fine but can=3D3DE2=3D3D80=3D3D99t seem to =
> send the =3D
>>> slightest =3D3D
>>>>> of signals. Someone please tell me what I=3D3DE2=3D3D80=3D3D99m =
> missing =3D
>>> before I =3D3D
>>>>> lose my head?
>>>>> Thanks.
>>>>> Ashley (KC1CPS)=20
|