Subject: | |
From: | |
Reply To: | |
Date: | Thu, 1 Oct 2015 08:37:49 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Don,
I screwed up (not for the first time). To switch between ant 1 and ant
2 is the button just under the power button. The one to it's left, just
under the pf a key is to do the attenuator and rx ant. A long press on
this button will put the rx antenna rca jack on the rear in or out.
So maybe rx antenna selected by mistake, wrong ant 1 or 2 selected, or
rf gain turned down. Or probably something else.
Sorry for the error.
73, Steve KW3A
On 10/1/2015 8:20 AM, Steve Forst wrote:
> Don,
>
> Two things to check: RF gain (outer knob around the volume control:,
> or wrong antenna selected. A long press on the pre amp / antenna
> button will switch between ant 1 and ant 2. Upper left of the radio,
> second button down on left side. Just under the PF A key. Not sure a
> VFO reset (partial reset) affects the antenna selection. A full reset
> does.
>
>
> If it is the RF gain, any sort of reset won't return the knob to the
> correct position Knob should be full clock wise for full gain.
>
>
> 73, Steve KW3A
>
> On 10/1/2015 8:06 AM, Don Breda wrote:
>> Wow! Don't know what I hit but all of a sudden, I have no receive audio
>> from the 590s.
>>
>> The external speaker is working because the speech synthesizer comes
>> through it nicely but can't hear anything from the receiver.
>>
>> It is as if the squelch was turned all the way up but it isn't.
>>
>> No matter what band or freq i go to or what memory I choose the result
>> is the same even when I am on the AM broadcast band.
>>
>> Tried a v f o reset but that did not solve the problem.
>>
>> Anyone run in to this before and know how to fix it.
>>
>> Looked through the manual but don't see an answer.
>>
>> Thanks in advance.
>>
>> Don
>>
|
|
|