Tom,

Not sure what firmware you have. I'm pretty sure Lowell is pre 2.0 
firmware.  In v 2.0 or later, a long press on the split  - either long 
press and release, or press and hold, and the voice will say "enter", 
and you hit the number on the keypad for how many khz up you want the 
split.  Hitting "5" for example will put you up 5 . A leading zero will 
put you down for the split  Hitting "05" will put you down 5.

Of course on pre 2.0 firmware, none of this happens.


But you knew all that didn't you?

73, Steve KW3A

On 8/27/2015 9:42 PM, Tom Behler wrote:
> Steve:
>
> You are right.
>
> I just did it, and a long press of the button is not necessary.
>
> Just haven't done it for a while, I guess.
>
> Tom Behler: KB8TYJ
>
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Thursday, August 27, 2015 9:39 PM
> To: [log in to unmask]
> Subject: Re: A TS-590 question?
>
> Lowell,
>
> Just hit the split button .  It toggles between split and normal.
>
> In case you are hitting the wrong button: The split button is the=
> =20
> leftmost of the second row of buttons to the right of the tuning knob= .
>
> 73, Steve KW3A
>
>
>
> On 8/27/2015 9:30 PM, Lowell Miller wrote:
>> What is the proper way to get the radio out of split mode. I am  > =
> speaking of the voice saying S A7.186 The way I am doing it can not=
> =20
>   > be correct as it takes several key =3D strokes. Thank you! Lowell =
>> =20
> W8QIY >
>