Jim,
You can't adjust the speed of the VGS3, and there's really only one voice
despite Kenwood's "Voice1" and "Voice2", which are actually different
functions of the same chip. "Voice1" reads out frequency and speaks menu
numbers, and "Voice2" speaks the S-meter reading.
Steve
----- Original Message -----
From: "Jim Gammon" <[log in to unmask]>
To: <[log in to unmask]>
Sent: July 28, 2015 16:04
Subject: TS2000 has two voices?
>I am curious about the two voices that are possible on the TS2000. I have
> always wanted the chip to talk faster, how do I select between the voices?
> is that possible? Jim WA6EKS
>
> -----Original Message-----
> From: Steve Forst
> Sent: Tuesday, July 28, 2015 12:46 PM
> To: [log in to unmask]
> Subject: Re: Help for a dumb dumb
>
> Yes, the pound key on the number pad. The same key you would press to
> enter a frequency from the keypad. When you press it the first time,
> it is expecting you to enter a frequency. When you hit it the second
> time, it aborts the entry process and speaks the current frequency.
>
> If you set the pf key to the other voice setting, it will read
> frequency, but you have no other way to get the s meter reading. If
> you set the pf key to read s meter, you have another option to read
> frequency (mentioned above).
>
> 73, Steve KW3A
>
> On 7/28/2015 3:27 PM, Frank Ventura wrote:
>> Hi thanks great info. Voice 2 sounds like a good idea. When you say press
>> t=
>> he enter key twice quickly do you mean the pound key on the keypad or the
>> P=
>> F key? Also what would voice 1 do?
>> Thanks for the great info
>> Frank
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> =
>> On Behalf Of Steve Forst
>> Sent: Tuesday, July 28, 2015 2:54 PM
>> To: [log in to unmask]
>> Subject: Re: Help for a dumb dumb
>>
>> Frank,
>>
>> You can set menu 51 A to a bunch of choices, depending on what you want
>> to=
>> do.
>>
>> If you set to number 00 through 62, it will call that menu item when=20
>> the pf key is pressed. The other choices are these:
>>
>> 63 Voice 1
>> 64 Voice 2
>> 65 RX MONI
>> 66 DSP MONI
>> 67 QUICK MR
>> 68 QUICK M.IN
>> 69 SPLIT
>> 70 TF-SET
>> 71 A/B
>> 72 VFO/M
>> 73 A=3DB
>> 74 SCAN
>> 75 M>VFO
>> 76 M.IN
>> 77 CW TUNE
>> 78 CH1
>> 79 CH2
>> 80 CH3
>> 81 FINE
>> 82 CLR
>> 83 CALL
>> 84 CTRL
>> 85 1MHz
>> 86 ANT =BD
>> 87 NB
>> 88 N.R.
>> 89 B.C.
>> 90 A.N.
>> 99 OFF
>>
>> I keep mine set to either voice 2 or cw autotune. The voice 2 will=20
>> read s meter when the key is pressed. If you set this way, you would=20
>> get frequency by pressing the enter key twice quickly.
>>
>> I think page 77 in the manual covers all this junk. Have fun,
>> enjoy=20
>> the radio.
>>
>> 73, Steve KW3A
>>
>>
>> On 7/28/2015 2:33 PM, Frank Ventura wrote:
>>> Hi all, I need a little help. I am experimenting with a Kenwood TS2000
>>> wi=
>> th=3D
>>> the VS3 board installed. I have gotten most of what I need done
>>> and=20
>>> have h=3D ad a few QSOs on one of our local 2 meter repeaters. I know=20
>>> that I can cont=3D rol the rig with the computer and will experiment=20
>>> with that shortly but wan=3D t to learn to use it as best as possible=20
>>> without computer control first. Th=3D e problem that has this dumb
>>> dumb=20
>>> puzzled is programming the PF key in the =3D upper left corner next
>>> to=20
>>> the power button. I have successfully adjusted th=3D e VS3 volume
>>> with=20
>>> menu 15. I would like to change the setting of the PF but=3D ton.
>>> Current=
>> ly right now it toggles between Menu and VFO when pressed. If I=3D
>>> am reading the manual correctly I think it can be changed with
>>> menu=20
>>> 51a. O=3D K now this is where I get lost. I can't tell what choices I=20
>>> have to set it =3D to or how to set it. When I cycle through choices
>>> in=20
>>> menu 51a I think it on=3D ly gives me numbers. Can the PF button be=20
>>> programmed to read the current fr=3D eq? If not then what is the most
>>> us=
>> eful thiong to program it to do?
>>> Thanks
>>> Frank
>>>
>>>
>>>
>>
>>
>>
|
