Thanks, John. Should be one hell of an adventure, or a bust, hi.--Matt, N1IBB.
At 06:50 PM 7/17/2015 -0400, you wrote:
>You don't need the "patch cord".
>----- Original Message -----
>From: "Matthew Chao" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Friday, July 17, 2015 4:40 PM
>Subject: Re: Digital Modes
>
>
> > Hey, Steve. the toy has arrived. It's a Signal USB 6PM. It came
> > with three cables: a USB, A DIN TO RJ45 cable, and a 3.5mm patch
> > cord. The rear panel has the two connectors, plus a few female
> > connections. The front panel has a pushbutton in the upper righthand
> > corner, and three knobs in a row with pointers. Understand where the
> > two thicker cables go, but what about the patch cord? Also, are the
> > installation instructions on the CD? Would like to do as much of the
> > install as possible, as my YL is technically challlenged, hi,
> > hi. Thanks in advance.--Matt, N1IBB.
> >
> > At 10:13 AM 7/17/2015 -0400, you wrote:
> >>OK Matt,
> >>
> >>Since you don't have enough to read, be sure to read about the data
> >>mode selection of the 480 and how to set the DSP filtering for data
> >>mode. There is similar filtering in the 590, but I don't do it this
> >>way so I'm not familiar with it's use.
> >>
> >>You would want to toggle your mode selection until you hear "L D"
> >>meaning lsb data. Menu 45 toggles data filtering on and off, but you
> >>will have to read up on this to figure it all out.
> >>
> >>73, Steve KW3A
> >>
> >>
> >>On 7/17/2015 9:32 AM, Matthew Chao wrote:
> >> > Hi, Steve. Thanks much. The main page is a bit daunting,
> >> > indeed. However, I will follow your suggestion and review these
> >> > articles. The new toy is scheduled to arrive sometime today.--Matt,
> >> > N1IBB.
> >> >
> >> > At 08:13 AM 7/17/2015 -0400, you wrote:
> >> >> Matt,
> >> >>
> >> >> A couple of days ago you said you couldn't make anything out of the
> >> >> hamradioandvision.com site I had suggested. Since MMTTY is one of
> >> >> the
> >> >> programs you seem interested in, I've cherry picked 2 articles on
> >> >> that
> >> >> software from the site:
> >> >>
> >> >>
> >> >> http://www.hamradioandvision.com/mmtty-accessibility-vision/
> >> >>
> >> >> http://www.hamradioandvision.com/mmtty-text-to-speech/
> >> >>
> >> >>
> >> >> I'm not sure there is anything particular to Digipan on the site, but
> >> >> maybe if you dig deep enough you will find something. There is a
> >> >> lot of good info on the site for blind hams, but I think the main
> >> >> page
> >> >> can be confusing. You will also find references to software that
> >> >> will give options other than MMTTY and Digipan.
> >> >>
> >> >> Once you get your feet wet, go back to the site and poke around.
> >> >> Things that seem odd today may make sense later on.
> >> >>
> >> >> 73, Steve KW3A
> >> >
> >> >
> >> >
|
